Bluetooth Doctor Model reset tips, manuals and Bluetooth device fixes
What devices are causing issues?  Select now to help us find the best solutions for you – CLICK HERE

Reset tips for Tzumi Tzumi Sound Mates

Are you having problems with your device? One solution may be to reset it.

Reset tip #1

1. Place both earbuds in the charging case.
2. Take the earbuds in and out of the case while the charger is on.
3. Turn the charger off and then back on while the earbuds are in the case.

Reset tip #2

1. Take the Sound Mates out of the case.
2. Press the button on the back of each device.

Reset tip #3

1. Turn off Bluetooth on your phone.
2. Set both pods on a table for 5 minutes to ensure they turn off.
3. Put the pods back in the case.
4. Turn on Bluetooth and scan to remove any instance of Tzumi.
5. Remove the pod that was flashing red/blue (usually the left).
6. It should connect.
7. Remove the other pod. It should connect.

Reset tip #4

1. Long press the Multi-function button for about 4 seconds until you hear 'Power off'; both earbuds will turn off.
2. Alternatively, place the earbuds into the charging case to automatically turn them off while they charge.

Reset tip #5

1. Place both earbuds in the charger.
2. Take them in and out of the charger while it's on.
3. Turn the charger off and then back on while the earbuds are in it.
4. Experiment with the positioning of the earbuds in the charger.

Reset tip #6

1. Place both Sound Mates earbuds in the charger.
2. Remove them from the charger while it is powered on.
3. Place them back in the charger.
4. Turn the charger off.
5. Turn the charger back on after a few seconds.

Reset tip #7

1. Open the charging case while the Sound Mates are plugged in.
2. Take the Sound Mates out of the case and try to turn them on.
3. If they don't turn on, drop them back in the case.
4. Disconnect the charging case from power.
5. Check for a light indicator; if it appears, plug the case back in and allow them to charge.

Reset tip #8

1. Use a metal paper clip to gently poke around the two silver/golden charging ports inside the charging case.
2. Ensure that the metal charging ports are completely in place and not obstructed.

Reset tip #9

1. Place both earbuds in the charging case.
2. Press and hold the left earbud until the red light stays on, similar to the right earbud.

Reset tip #10

1. Place both earbuds in the charging case and ensure they are charging properly.
2. Press and hold the multi-function buttons on both earbuds simultaneously for about 5 seconds until you see the lights flash.
3. If the left earbud does not power on, try removing it from the case and pressing its button individually for 10 seconds.
4. If the left earbud still does not respond, repeat the process of placing both earbuds back in the case and ensuring they have adequate charge.

Reset tip #11

1. Hold down both Sound Mates devices when they are turned on until you hear a sound coming from them.
2. Click both devices twice to initiate the connection.
3. One of the devices will connect with your phone.

Reset tip #12

1. Shut off both Sound Mates earbuds.
2. Turn off Bluetooth on your device.
3. Turn on both Sound Mates earbuds at the same time.
4. Take out the earbud you want to hear calls from.
5. Double tap the button on that earbud.
6. Turn Bluetooth back on on your device.
7. Connect to Tzumi Sound Mates.

Reset tip #13

1. Turn off Bluetooth on your first paired device (e.g., your phone).
2. Turn on the Bluetooth on your laptop.
3. Go to 'Bluetooth and other devices settings' from the Windows search bar.
4. Look for 'Tzumi Sound Mates' and connect.

Reset tip #14

1. Unpair the Sound Mates from your device.
2. Connect a different Bluetooth headset to your device.
3. Adjust the volume for the different headset to ensure the volume control is functioning.
4. Once the other headset is connected and volume is adjustable, unpair it.
5. Re-pair the Sound Mates to your device.
6. You should now be able to control the volume from your device.

Reset tip #15

1. For sound lag, pause the video.
2. Wait for the quiet ringing to stop.
3. Play the video again.

Reset tip #16

1. Power down the left earbud by holding the button.
2. Charge the case by plugging in the micro USB.
3. Once the case is charged, unplug it and charge the earbuds.
4. If necessary, power down before charging the earbuds.
5. To improve charging contact, place a small piece of toilet paper in the case to ensure the earbud fits snugly.

Reset tip #17

1. Place the SoundMates in the charging case to initiate charging automatically with the magnetic base.
2. The LED will turn solid red while charging.
3. Once fully charged, the LED will turn off.
4. If you need to reset the earbuds, the instructions mention the earbuds will blink blue while resetting.

Reset tip #18

1. Disconnect both Sound Mates.
2. Turn on both Sound Mates at the same time.
3. Once they both say 'power on', double tap the left earbud.
4. Wait for a beep indicating they are ready to pair.
5. Search for Sound Mates on your phone.

Reset tip #19

1. Make sure at the bottom of the stem on the earbud, the silver piece hasn't come loose. If it has, reinsert it with a half twist.
2. If the earbuds are not charging properly, check the charging case to ensure it is functioning correctly.

Reset tip #20

Make sure Sound Mates are off.
Turn each one on individually and hold the button for a longer time than you would to pair them to your phone until you hear beeps.
Push the right one twice to connect them together.
Now turn them off and turn them both on simultaneously.
They should pop up on your device.

Reset tip #21

Disconnect the ear buds from your phone.
Turn off the ear buds.
Turn them on together.
Put them in your ear.
Double click the button on both sides until a tone sounds from both headphones.

Reset tip #22

1. Check the bottom of your earbud for the gold colored plates.
2. If you see black or half black and gold, gently use a toothpick to move the plate back into position.
3. Ensure the gold plates completely cover the charging holes.
4. If charging issues persist, try removing and replacing the earbud in the charger while the charger is turned on, waiting a few seconds before each change.
5. Consider leaving the charger plugged in and turning it on and off slowly to see if it restores charging.

Reset tip #23

1. Forget both devices.
2. Turn off Bluetooth.
3. Turn both headphones off.
4. Power them on at the SAME time and hold until you hear the chime.
5. Immediately double click the left airpod until you hear a noise in one then the other.
6. Turn Bluetooth back on.
7. Connect ONE of the tzumi soundmates.

Reset tip #24

1. When the earbuds are in the case, they will show a red light to indicate they are charging.
2. The earbuds are fully charged when the red lights on them turn off.
3. The case is fully charged when the red light stops blinking and turns to a solid red.

Reset tip #25

1. Make sure both earbuds are off.
2. Turn off Bluetooth on any device they connect to.
3. Hold down the multifunction button on both earbuds. Do not stop holding once they turn on. CONTINUE TO HOLD until you hear a chime.
4. Press twice quickly on the earbud you want to use for pause and phone calls.
5. Turn Bluetooth back on for the device they are connected to. You may have to forget the device and re-pair them.

Reset tip #26

1. Make sure the Sound Mates are fully charged by placing them in the charging case.
2. After charging, take the earbuds out of the case.
3. Press and hold the power button on the earbuds for several seconds to attempt to power them on.

Reset tip #27

If your ear buds have trouble charging, just take them out and put them back in.
Charge the case without the buds in, and change the buds with the case unplugged.

Reset tip #28

1. Plug your charging case into a power source and place both earbuds inside.
2. Wait for at least 4 hours to ensure they are fully charged.
3. After charging, try to power on the right earbud by holding down the button.

Reset tip #29

1. Turn off both Tzumi Sound Mates.
2. Turn on both Sound Mates at the same time by holding down the buttons until you hear 'Power On'.
3. Double click the right earbud until you hear a ding.
4. Double click the left earbud until you hear a ding.
5. They should now be paired together.

Reset tip #30

1. Delete all previous Bluetooth connections for the Sound Mates on your tablet.
2. Press and hold the pairing button on the primary Sound Mate until it flashes blue.
3. Ensure the secondary Sound Mate is turned on and properly paired with the primary one.
4. Attempt to pair the Sound Mates to your tablet again.

Reset tip #31

1. Disconnect and forget the device from your Bluetooth settings.
2. Turn off Bluetooth on your device.
3. Turn both Sound Mates on at the same time by holding the buttons until you hear 'Power On'.
4. Keep holding the buttons until you hear a chime in both ears (approximately 10 seconds).
5. After the chime, double click the left earbud once (do not keep double clicking).
6. Go to your Bluetooth settings and look for the connection labeled 'Tzumi Sound Mates'. Select the first one to connect.

Reset tip #32

1. Disconnect and forget device on your phone.
2. Turn on Bluetooth on your phone.
3. Put both earbuds in your ears and power them both on at the same time.
4. Keep holding the power button until you hear a chime in both ears (approximately 10 seconds).
5. After hearing the chime, double click the left earbud once (do not keep double clicking).
6. There should be 2 TZUMI SOUND MATES under your Bluetooth settings; click only the first one.
7. You should now be connected!

Reset tip #33

1. Ensure both earbuds are fully charged.
2. Power off both earbuds.
3. Press and hold the power button on both earbuds simultaneously until the LED indicators flash red and blue.
4. Release the buttons and let them enter pairing mode.
5. Try to connect both earbuds to your device again.

Reset tip #34

1. Turn both earbuds off.
2. Unpair them from the phone.
3. Turn on each earbud at the same time by holding down the buttons simultaneously until you hear 'power on'.
4. Click the button on the left earbud. You should hear a tone in both earbuds indicating they are paired together.
5. Now, pair one of the earbuds to your phone from the list of discoverable devices.



How else we can help you?




Need help finding a new Bluetooth device? Click here!