I have skull candy push earbuds My right earbud will not pair or connect to my device. My left one does it perfectly fine but my right one continues to blink red and blue and not connect. HELP ME PLEASE
Hi John, that's exactly what I tried too and didn't work. The ear buds are fully charged and only the master (left one) paired to my phone. The right one does not pair automatically to the left and continually blinks red-green.
Is there a step I'm missing to pair the right one to the left ear bud?
John (Admin) responded : 7:02pm, 10th July 2019 (7 months ago)
A useful tip to reset them; turn both buds off and then hold down the big button on each at the same time for 12 to 13 seconds. That will repair them both together.
Mary responded : 4:31pm, 3rd December 2019 (2 months ago)
I have the skull candy push earbuds and they both connect perfectly. But when I put the left one to charge in the case my right one stops working. And I cant hear anything and it turns off on the right earbud
Juan (Admin) responded : 10:08am, 4th December 2019 (2 months ago)
Mary, just to clarify, resetting them as suggested in the tip above doesn't help at all ?
Ruan responded : 12:13am, 11th January 2020 (1 month ago)
The left and right earbuds can connect independently to 2 different devices. I just found this out. You can actually select which mode each earbud is in (connect to the other earbud or connect to another device), however it can only be in 1 mode at a time. It's not in the handbook or anything, but I figured out that if you tap the button 3 times (twice quickly and then hold down on the 3 click) a purple light comes on. This purple light seems to indicate the mode switch. If you click the button 3 times again as before, it'll start flashing blue and red lights, which means it's trying to pair. If done correctly, it should repair to the earbud connected to the device, or it should switch into an independent pairing mode. Hope this helps. (Btw, this is all just from personal trial and error, skullcandy never said anywhere that their devices can do that as far as I'm aware)
Bryce responded : 1:34pm, 31st January 2020 (2 weeks ago)
John, i turned them off then held both for 12-13 seconds but they flash red and blue like they are trying to pair but cant for some reason.
Bryce responded : 3:48pm, 4th February 2020 (2 weeks ago)
John, i fix it, all you gotta do is follow what you said but what i did was hold it longer to where both earbuds flash blue twice( they flash blue the first time because you turned them on and they flash once btw, and then you keep holding till it flashes blue once more then that fixed the pairing problem.
Bluetooth Doctor is not responsible for, and expressly disclaims all liability for, damages of any kind arising out of use, reference to, or reliance on any information contained within the site. Never undertake manual repairs or modifications to hardware if without qualifications and always seek guidance from your retailer if you can't find a solution to your problem.